Diesel Fuel Heater for Trucks

It is too cold to stay inside vehicle if the driver donot turn on the air conditioner. But to turn on the ac, we need turn on the engine which will consume a lot fuel and energy and engine noise is too big to keep calm inside vehicle.

The diesel fuel heater for trucks is an in-vehicle heating device which is independent from the vehicle engine.It has its own fuel pipe,electric circle,combustion heating and control panel, etc.

When the vehicle is parking, driver can use this parking heater to warm up the cold environment of cab without starting the engine.It can be installed under truck seat or any other place . Can be used to work under high altitude mountain environment

- Low noise: noise reduction processing with minimal noise.
- Easy installation: the design is good for using in a variety of narrow spaces.
- Low fuel and power consumption for longer periods of operation.
- Smooth, automatic room temperature control with temperature pre-set facility.
- With continuous monitoring and diagnostic system.
- Fuel supplied from the vehicle's own tank.

- Compact design all in one unit which is easy installed
- Applicable to: various diesel mechanical vehicles such as cars, buses, RVs, trucks, engineering vehicles, etc.

The diesel fuel heater for trucks is mainly controller by microcomputer. The heat exchanger is located in shell as an independent air passage.

The cold air is drawn into the air duct by the forced draft fan.When the cold air becomes hot, it is blown out to form a combustion heating system.In this way, the cab and passenger compartment can be heater whether the engine is working or not.

It has the advantages of compact structure, convenient installation, energy saving and environmental protection, safe and reliable, simple maintenance and so on

This diesel fuel heater for trucks has compact design, all in one unit type, easy carry and portable

The full package of heater including :Diesel Heater,remote control,wiring, installation parts,air outlet and intake pipe,exhaust pipe and accessories.

Nanjing FUTRUN Vehicles Technology Co., Ltd. specializes in products related with environment in vehicle as well as the completed solution of air conditioner and heating system for all kinds of vehicles. Our main products include air conditioner for bus and coach, air conditioner for trucks,air conditioner for caravan, portable air conditioner, air conditioner for off-high, refrigeration units , etc.

We believe that a comfortable environment in vehicles can bring joy and ease to people and make people's mobility and working more efficient. More than 10 years experiences in field of automobile air conditioning and heating system allows us to be able to understand customer's requirement better. That's why we concentrate on developing customers and market orientation products with our expertise while placing high emphasis on quality.

We enjoy long-term customer relationships based on a spirit of trust, and will continuously further develop these contacts with existing and new customers. All that we do is to fulfill our slogan: comfortable environment for better life.

We have passed ISO9000,IATF16949 and CE certificate of our portable diesel heater for caravan products.we strictly follow the requirements in IATF16949 to make sure all products from our factory are qualified.

1. Installation, the fixed plate must be kept closed with the car sheet metal, so as not to burn the exhaust through the gap into the cab damage to the driver's body.
2. The length of the exhaust pipe shall not be less than 30 cm.
3. The exhaust outlet must be fixed in the open space.
4. Exhaust pipe outlet is not allowed to travel direction.

Recommendation: After the heater is fixed, it is recommended to use the sealant to seal the installation gap.

We have 2KW, 5KW,8KW heating capacity options. The style can be vertical integrated , horizontal integrated, split in plastic cover, split in aluminum cover, smart dimension type as options as showing in below.

Q: How is quality ensured?

A: All our processes strictly adhere to ISO-9001 procedures.And we have a one year quality warranty BL issue date. If the product does not work property as described, and the problem is proven to be at our fault, we will provide exchange services for the same specific item.

Q: What is your Minimum Order Quality?

A: Different products have different MOQ,but we can sell you even one piece if we have stock the model of you need.

Q: What about delivery time?

A: If we have stock of the item you need, we can send goods to you within 2 working days after deposit or 100 percent payment into our bank account. If we don't have stock,the time to make each product is different generally, it takes 1 to 30working days.

Q: Do you accept customized orders?

A: Yes. OEM & ODM Orders are highly welcome.

Package: Neutral package/customer's design package: customer's own design box with own brand name printing logos in the body of sensors are acceptable.

Q: How it would be shipped? Do we support door delivery? And how much time and cost will it take?
A: Shipping method depends on your choices. We can support door delivery by air or to airport only to the worldwide by DHL, Fedex or UPS, and also we can do shipment to your sea port as well. The cost is different according to your location and the machine model you choose, you can ask for more courier cost details after deciding which machine to buy.

Q:What service we provide for you?
A. We support customer with formal technical suggestions, promise to response in one hour in Chinese day time, 6 hours during Chinese night time,follow custom for installation and after-sales service until no problem left and support customer to solve any problem related to our products for life time

Tag-uri populare: diesel fuel heater for trucks, China, manufacturers, factory, customized, wholesale, cheap, low price, for sale, in stock, made in China